CNC Machining for Automotive Applications

Since its beginnings in the 1860s, the automotive industry has predicated itself on innovation and moving forward. Many of the biggest innovations in the automotive sector have been tied directly to manufacturing advances. In 1913, for instance, Henry Ford revolutionized auto making with the first moving assembly line, bringing mass produced vehicles to people around the world. Since then, automation and streamlining have remained two key goals of the automotive industry.

In recent years, advances in design, robotics and manufacturing processes have led to significant increases in the automation of automotive production. These same technologies have also led to improvements in vehicle design and performance. CNC Machining is one technology that is playing an important role in the transformation of auto making.

CNC Machining is a computer-controlled manufacturing process capable of producing highly precise parts from metals and plastics. The process begins by converting a digital model of a part into machine instructions. The instructions are then sent to a CNC machine, where the appropriate tools (such as mills, drills, lathes and more) cut away from a block of raw material until a final part is achieved. CNC machines come in a variety of configurations, such as 3-axis and 5-axis, which enable variable degrees of complexity.

Advantages of CNC Machining for Automotive Applications

In the automotive industry, CNC Machining has been enthusiastically adopted, as manufacturers across the globe seek to benefit from the process’ many perks, including speed, automation, repeatability and more.

• Production speed

For medium to high production volumes, CNC Machining offers rapid production times compared to traditional machining. This is largely because of its automated nature, which eliminates the need to lengthy and labour-intensive manual machining. There are also steps that can be taken in the production planning process to speed up and optimize the machine’s run time, including material choice and part tolerances.

• Automation

Automation is in itself an advantage of CNC Machining. Not only does it allow faster production times compared to manual processes, but it also makes the automotive manufacturing process more streamlined. If a part is sent to be manufactured on a CNC Machine and robotic arms can assist in the removal of the part once it is done, workers can dedicate more time to design and innovation tasks.

• Repeatability

As a computer-controlled process, CNC Machining also brings with it a guarantee of repeatability—a crucial element in any industrial-grade production setting. In the automotive industry, ensuring that parts are consistent from batch to batch, so that each car rolled out is up to the same standard, is vital.

• Precision

In line with repeatability, CNC Machining is capable of achieving tight tolerances for parts that demand it—though costs can be reduced if tolerances are more lenient. For automotive applications especially, CNC Machining can meet the required tolerances for engine and other functional components. The process is also capable of producing complex parts for vehicles.

• Customization

Though it is perhaps not as well suited to customization as additive manufacturing, CNC Machining can be used in the automotive sector to produce customized parts with short lead times—either as one-offs or in small production volumes.

Prototyping Applications

CNC Machining can be used in the automotive industry for both prototyping and production applications. In the latter category, the process offers the benefit of producing high quality, functional prototypes, which can be tested and validated before going into production.

Because of the wide variety of materials compatible with CNC Machining, the process can be used to produce all manner of prototypes for vehicles, including metal or plastic parts for under the hood applications or to showcase design features for car interiors. Lighting components such as headlight covers, for instance, can be rapidly prototyped using CNC Machining and clear acrylic materials.

In the development of new car models, CNC Machining can also be used to rapidly produce high quality functional prototypes for testing performance.

Production Applications

• Interior panels

Interior vehicle components such as the dashboard panel can be manufactured using CNC Machining, which has the necessary precision for milling a dashboard frame from a block of raw plastic material and ensuring that the cutouts for the speedometer, gas gauge and indicator lights align perfectly when installed.

• Starter motors

Though many metal automotive components are still produced using casting processes—which are well suited to mass production—car manufacturers are still finding uses for CNC Machined metal. Complex parts such as starter motors, for instance, can be produced using CNC Machining. The precision and complexity of the process allows for these types of parts to be optimized and improved in terms of performance, durability and reliability.

• Cylinder heads

In the automotive and motorsport industries, CNC Machining is also regularly used in the production of engine blocks and cylinder heads, which cover the the cylinder in an internal combustion engine. The technology is particularly useful for limited runs or customized engine models. These components are typically made from a solid block of aluminum, which is an easy metal to machine. Other powertrain components, such as alternator housings, brake system valves and fuel pump systems can also be produced using CNC Machining.

• Drive axles

In a car, the drive axle is made up of two half axles which are each connected to a wheel by a constant velocity joint. The critical part enables the wheel assembly to move freely vertically and to pivot when the car is turning. Certain parts in the drive axle mechanism, such as the hypoid hears and bevel gears can be produced using CNC Machining.

• Gearboxes

The gearbox is the second stage in a vehicle’s transmission system and is made up of various shaft and gear components. These parts can be produced with CNC Machining, which offers high precision and good efficiency. Even parts of the gearbox that are cast can then be finished using CNC milling and drilling tools.

• Custom parts

CNC Machining can also be employed by OEMs for the production of customized components or rare replacement parts. In the restoration of vintage cars, computer-controlled processes such as CNC Machining and 3D printing can be used in combination with reverse engineering practices to create one-off parts which might otherwise be obsolete.

RapidDirect CNC Machining Services

At China Medical CNC Machining Inc., we offer a number of CNC Machining capabilities, including three, four and five-axis machines as well as a broad range of materials, such as aluminum alloys, steel, titanium, plastics and more. Leveraging our CNC Machining expertise and vast manufacturing network, we can deliver automotive components in as little as three days for our customers. Our manufacturing network and in-house equipment allow us to fulfill all manner of part orders, from single run prototypes, to large volume manufacturing.

Since automotive is a high-risk industry, we recognize the importance of precision and quality control when making car parts.

For the most critical parts in your inventory, we can accommodate extra-fine tolerances, down to +/-0.01 mm, giving you the ability to build complex interlocking systems with a tight fit.

We also guarantee quality via several quality control techniques. Technical assessments are carried out prior to manufacturing to identify potential design flaws, and material verification is available on request, providing confirmation of material heat number, grade, dimensions and other specifications.

Our CNC machines are fitted with on-machine inspection probes, and we observe in-process quality control and first-article inspection (on request). A full dimensional inspection report can also be provided on request.

CNC vs 3D Printing for Automotive Applications

There are multiple kinds of digital manufacturing technology used in the automotive industry, and it not always clear which is the best option for a project. The rise of production-quality additive manufacturing, for example, provides an alternative to CNC machining with its own set of unique benefits.

Products made by CNC machine are different to products made by 3D printer. That’s because CNC is a subtractive process (it cuts material away from a solid workpiece) and 3D printing is an additive process (it introduces new material layer by layer).

However, some parts can now be made either via subtractive means or additively.

Interior panels fit into this category. While CNC machined panels are sturdy and can be made from a wide range of materials, 3D printed panels provide a new alternative — especially for prototyping. For example, additive giant 3D Systems has used its ProX 950 SLA printer to fabricate an entire 3D printed dashboard measuring 1.5 meters in width.

Other 3D printed auto parts include brake components — Ford has used Carbon 3D printing tech to make a parking brake bracket from epoxy resin — and custom gear shifts, as demonstrated by Volkswagen.

So which manufacturing method should you choose? Of course, automotive engineering is a common application of CNC machine technology, and CNC machining results in durable, reliable car parts. On the other hand, 3D printing provides a high-speed alternative that can be used to create ultra-lightweight and highly customized parts.

Some manufacturers, like Divergent 3D, are even using additive manufacturing to create metal structural components — products made by CNC machine under some circumstances — for their futuristic vehicles.

FAQ

Q: What products made by CNC machine are used in the automotive industry?

A: One application of CNC machine technology is prototyping. In the automotive industry, CNC machined prototypes can include anything from headlight covers to engines. But CNC is also used to make end-use car parts such as cylinder heads, starter motors, gearboxes and one-off custom components for rare and vintage cars.

Q: What kind of CNC machine is used in the automotive industry?

A: Simple or one-sided car parts can be made from many kinds of CNC machine. However, complex items like cylinder heads and blocks generally require expensive 5-axis machining centers, which provide a much larger range of cutting tool angles and enable the creation of highly complex geometries with tight tolerances.

Q: What materials are used in automotive CNC machining?

A: Different parts require different materials: sometimes metal, sometimes plastic. The manufacture of cylinder blocks and heads — perhaps the most important application of CNC machine tech in the world of vehicles — is well suited to aluminum, since highly conductive aluminum heads expel large amounts of heat from the combustion chamber.

Share on social media...